Home & Garden

How to Install a Rainfall Shower Head


Rainfall shower heads, also known as rain shower heads, are a terrific substitute to classic vertical shower heads. When set up the right way, they carefully clean from previously mentioned, covering the full system like a cascading rainfall. Not only are rainfall shower heads mild on the pores and skin, but they are also a terrific expense that will insert benefit to your rest room. Fortuitously, they’re simple to install and friendly on the budget.

Move 1 – Choosing the Suitable Shower Head

There are a several elements that should be viewed as when finding out a rain shower head. For starters, the duration of the shower arm will depend on the measurement of the tub or the shower stall. Shower heads that are 7 inches function for most tubs, though arms that are 10 inches or lengthier are terrific for overhead installations. Additionally, make sure that the shower head does not fall as well minimal beneath the wall peak.

Move two – Acquire Supplies

Right before you get started the installation approach, take a speedy stock of the things you will need. Double-verify that none of the shower assembly parts are lacking, and position a rag more than the drain to avert any parts from slipping inside. Also, check the duration and peak of the arm to make certain the rain shower is not as well minimal.

Move 3 – Uninstall the outdated Shower Head

Just after the materials are collected, get started by eradicating the outdated shower head. Use pliers or an correct wrench to loosen the head from the shower arm. Position a rag all over the pliers to avert scratching. If you are putting in an extension arm to give higher peak for the rain shower, then you will need to eliminate everything connected to the wall outlet.

Move 4 – Apply Plumber’s Tape

With the outdated shower head totally eradicated, wrap a layer of plumber’s tape all over the threads of the new head. Make certain that the tape is wrapped alongside the full duration of the threads. This will develop a good seal that helps prevent water from escaping by means of the aspect of the head. It also aids preserve a regular water strain.

Move five – Set up

You can use a wrench or pliers to tighten the new shower head in position. On the other hand, if the head has a polished finish, then the pliers could scratch it up. To avert unnecessary damage, just screw on the head with your hands. Just make certain the threads line up and everything is good and tight ahead of going on to the up coming action.

Move 6 – Cleanup

Now that the new shower head is in position, eliminate the rag from the drain and any other applications in the tub. You can use the box from the new shower head to maintain all the outdated parts. It’s a good strategy to retain the outdated unit just in situation you ever want to re-use it in an additional rest room or the rain shower fails to meet up with anticipations.

Move 7 – Test

At the time everything is cleaned up, switch on the water and examine the new head for any leaks. If there are any leaks, make sure that the head is tightened. Make certain the plumber’s tape is the right way set up. You should be ready to see some of the tape sticking out right after tightening the head. Also, examine the wall outlet and arm connections for any water leakage.

Move eight – Escutcheon

Some rain shower products incorporate a matching escutcheon that should be set up close to the wall or ceiling. The escutcheon is a flat insert that guards the wall guiding the shower from finding soaked. If you have to install an escutcheon, make certain you position plumber’s tape on all threaded connections and function your way from the wall out to the shower head.

Move nine – Tips

If you are putting in a new shower arm, then make certain you install it ahead of connecting the head. This will make the installation less difficult and give you plenty of home to tighten the new arm to the wall outlet. Additionally, the quantity of strain in the rain shower head will lower in accordance to its measurement and the quantity of nozzles. If you want to preserve good water strain, then contemplate purchasing a scaled-down head, which commonly has much less nozzles

Leave a Reply

Your email address will not be published. Required fields are marked *